Upscaler Test with Commodore C64

Today I tried some upscaler / scandoubler devices with the Commodore C64 computer and compared the results.

Ligawo S-Video / Composite (~30€)


Sam's Journey (1080p)

RetroTink-2X Scandoubler (~90€)


Sam's Journey

RetroTink-2X + mClassic Upscaler (~90€ + 100€)

Sam's Journey (1080p)

Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

Amiga Test Kit

Bild
Summary Perfect diagnostic tool for your Amiga to test memory, keyboard, floppy, I/O devices, Audio, Chipset and some others! Here is a tutorial how to build it! If you are lazy or not interested in the details you can download the binaries here ! Build Amiga Test Kit (on Linux) Needed Downloads: binutils-2.28 ( Link ) gcc-7.1.0 ( Link ) Amiga Test Kit ( Link ) Extract them to a folder in your home directory e.g. /home/user/projects. (tar -xvjf binutils-2.28.tar.bz2, same with gcc) Configure for m68k ../binutils-2.28/configure --prefix=/path/to/install --target=m68k-unknown-elf Makefile will be created. Build with make && make install ../gcc-7.1.0/configure --prefix=/path/to/install --target=m68k-unknown-elf --enable-languages=c --disable-libssp Makefile will be created. Build with make && make install mpfr not found try this: ./contrib/download_prerequisites If everything worked like a charm you have to add the new binaries to your PATH vari
Mehr anzeigen

Amiga 1000 PSU recap

Bild
If you have stability issues with your 34 years old Amiga 1000 it's a very good idea to check the output lines of the power supply: +12V,-5V and +5V! Plug pinout: Check with scope to also see ripple and noise or rough with a multimeter!                    Current Voltage      Min.    Max.             Stability        Ripple & Noise ------------------------------------------------------------------------------ +5V            2A         8A               +/- 5%           150 mV P-P +12V          0A         1A               +/- 5%           150 mV P-P -5V             0A          0.25A         +/- 5%           150 mV P-P When it comes out that the output values are too bad you have to replace the old capacitors of the PSU! For this you must disassemble the whole computer due the position of the power supply: I have the Shindengen CA1000PS/EC (PAL Version)! Documentation: Link If everything disassembled you should have this PCB:
Mehr anzeigen

Walkom NP-903

Bild
This unbranded i386SX laptop from 1991 is a clone of the more common MicroStar (MSI) NoteStar NP-903.  Technical specifications: CPU: Intel i386SX 16MHz RAM:  2MB Graphic: Chips & Technologies 82C456 VGA Controller Chipset: Headland Technology, Inc. HT21 IDE / Floppy controller: Acer M5105 Floppy:  Citizen U0DA-19A Mainboard Power Supply Test Reviews PC Magazine, August 1991 (Modern Computer, Walkom NP-903) PC Magazine, January 1992 (MicroStar Computers, NoteStar NP-903) Remark: According to Wikipedia Modern Computer is another Product line of MicroStar. Upgrades RTC clock Dallas DS1287:  modern replacement:  nwX287 by Necroware (changeable battery)  Math Co-Processor: Cyrix FasMath 83S87 (fastest of the 387SX compatible coprocessors) RAM Upgrade from 2MB to 4MB Harddisk CF Compact Flash 2.5" 44Pin, 2mm, IDE Converter    Repairs Floppy drive If the floppy drive makes loud noises when the disk is accessed and nothing can be read, it is a good idea to perform these ste
Mehr anzeigen